Products > Fire Alarm Systems

Conventional Fire Alarm Systems

Smoke Detector

Control Panel

Modular Type Control Panel

Fire Panels will be the brain behind the fire alarm systems. These units will notify the user about the fire condition with a clear indication about the zones in which fire was sensed.

   
SPECIFICATIONS
TYPE OF SYSTEM Fire Detection & Alarm System
NO. OF ZONES PROVIDED 1 to 200 zones
POWER SOURCE 230V AC
TYPE OF DETECTORS USED IN THE INSTALLATION
  • Ionisation type smoke detectors
  • Photoelectric smoke detectors
  • Fixed temperature cum rate of raise in temperature detectors
WIRING REQUIRED 2 wires
FAULT INDICATION/ALARM PROVIDED FOR
  • Open circuit in detector cabling for each zone.
  • Short circuit in detector cabling for each zone.
  • AC failure.
  • Battery low. (adjustable from 22 V to 23 V)
VISUAL INDICATIONS
FIRE Two flashing red LEDs in the zone under "Fire".
FAULT Two steady glowing yellow LEDs in the corresponding zone.
CHARGER ON One separate yellow LED for "Charger On" indication.
SYSTEM ON One separate green LED for "System On" indication.
AC & DC FUSE BLOWN INDICATOR Separate red color LED for AC & DC "Fuse Blown" indication.
AUDIO ALARMS
  • Fire: A beep sound in the panel.
  • Fault: A continuous tone in the panel
  • After alarm cancellation Hooter sound changes to a low continuous tone & when another zone enunciates fire again, the main Hooter gets activated. Audio alarm can be silenced by ALARM CANCEL button.

 

Feather Touch Control Panel

2 zone and 4 zone fire Alarm Control Panel Designed for Homes, Offices, Shops, Banks, Godowns, Hospitals, Petrol Pumps, Farm Houses etc. The System has been Developed Indigenously by our R & D Division, Conforming to BIS 2189 Standards. The System has been Manufactured by us to withstand Indian conditions for long life and Uninterrupted Service. The Systems Offers Exceptional Features, a Power Supply that Handles the Panels Full Rated Load Plus Quick and Simple front Panel access to suit the application at hand.

FEATURES

  • CONFORMS TO BIS 2189

  • COMPACT,EASY TO INSTALL AND MAINTAIN

  • SUPPORTS A WIDE VARIETY OF DETECTORS

  • PROVISION FOR AUTO DIALER

  • PROVISION FOR AUTO DIGITAL METERS

  • ZONE WISE HOOTERS

  • POTENTIAL FREE CONTACT FOR CUSTOMER USE

  • FULL FEATURED BUILT IN TEST FACILITY

  • FULLY PROTECTED POWER SUPPLY WITH BUILT IN CHARGER.

SPECIFICATIONS
 
ELECTRICAL PHYSICAL
  • POWER SUPPLY INPUT: 230V, 50Hz
  • BATTERY BACKUP: 24V, 7AH
  • OPERATING VOLTAGE: 24V
  • BATT. CHARGER: CONSTANT VOLTAGE
  • END OF LINE: 4.7K W
  • NORMAL PANEL CURRENT: 300mA
  • PANEL ALARM CURRENT: 400mA
  • WEIGHT: 2.5 Kg (WITHOUT BATTERY)
  • SIZE:325 X 225 X 100 mm
  • COLOUR: SIEMENS GRAY
 
AUDIO-VISUAL INDICATIONS OUTPUT
  • SYSTEMS ON
  • CHARGER ON
  • AC FAIL
  • BATTERY LOW
  • FIRE
  • OPEN
  • SHORT
  • ISOLATE
  • FOR HOOTER: 24V, 1A MAX
  • AUX. RELAY CONTACTS

 


17, Latif Building, Dr. Ambedkar Road, Dadar (E), Mumbai 400 014. Tel : 91.22.32713567 Telefax: 2413 7938